Wondering how to make a pop up card without special tools? You only need two sheets of cardstock, scissors and glue: fold a strip into a box shape, glue its ends inside the card, and it pops up.
If you are just starting out, more simple projects are collected in this guide to paper crafts for beginners.
| Item | Value |
|---|---|
| Cardstock for the box-fold card | 2 sheets |
| Hinge strip for the Z-fold pop-up box | 10 cm by 3 cm |
| Score lines on that strip | 3 cm and 7 cm |
| Weight of sturdier cardstock | around 200-300 gsm |
| Time for the DIY.org pop-up box project | 45 min |
These figures come from the KiwiCo pop-up card tutorial and the DIY.org pop-up box activity. They can change, so check the sources before you rely on them.
What you need before you start
The simplest version, from the KiwiCo tutorial, uses 2 sheets of cardstock: one for the card and one for the pop-up spring. The rest is probably already in your craft drawer.
- Scissors
- A glue stick
- Construction paper or cardstock scraps for the character and any lettering
- A black marker, optional, for extra details
Paper weight matters because thin sheets sag instead of standing up. The DIY.org activity page notes that heavier paper, around 200-300 gsm, makes sturdier pop-ups. If you want to compare weights before buying, the cardstock weight guide is a good next read.
How does a pop up card work?
The mechanism is called a box fold, also known as a parallel fold, and the KiwiCo tutorial uses it for its card. Both ends of the folded box are glued to opposite sides of the card’s centre crease, so opening the card pulls those two glued points apart.
The sides of the box stay parallel to each other, which leaves them nowhere to go but up. That is what lifts your character out of the card in one smooth motion.

Step-by-step: the box-fold pop up card
These steps follow the KiwiCo tutorial in order. Work on a clean, flat surface and keep your scraps close.
- Make the base. Fold one piece of cardstock in half, then trim it to the size you want for the finished card.
- Cut a strip. Take a long strip from your second sheet, or from the leftover half of the first.
- Fold the box. Fold the strip in half, then keep folding it section by section until it forms a small rectangular box. Crease every fold firmly so it holds.
- Glue it in. Attach one end of the box to the inside back panel and the opposite end to the inside front panel, centred over the fold line so it is balanced on both sides.
- Add the character. Cut a character, shape or design from paper and glue it to the front face of the box.
- Decorate. Add a title on the cover, details such as arms and legs, and a message inside.
Once the glue is dry, close the card and open it again to test the action. According to KiwiCo, the same creases let the box collapse flat when the card is closed, so nothing gets crushed. You can read the original steps on the KiwiCo page.
A top-folding card with a pop-up panel
A second method comes from a LoveCrafts tutorial featuring a design by Amy. Instead of a folded box, a scored strip forms a stepped panel inside a top-folding card. You will need a scoring tool, a trimmer and adhesive for this one.
- Card base: cut 8½x11in cardstock into two bases measuring 4¼x11in, then score the long side at 5½in (LoveCrafts).
- Pop-up piece: cut white cardstock to 4×10½in and score it at 5¼in and 7¾in (LoveCrafts).
- Focal piece: decorate a 3x4in piece of paper, then mount it on a 3¼x4¼in backing (LoveCrafts).
Fold the strip in half at the first score line, then fold it back at the second to make the pop-up piece, and glue that panel to the card base. Patterned paper panels go on top of it, and the focal piece sits at the centre.
Glue only the bottom portion of the focal piece. The LoveCrafts tutorial says this lets the top move freely instead of sticking to the back panel.
Tips for cleaner folds and a sturdier finish
A third route is a pop-up box with a Z-fold hinge. The DIY.org activity cuts a strip 10 cm by 3 cm, scores it at 3 cm and 7 cm, folds it into a Z, and glues one end inside the back wall and the other to a cut-out shape. The page lists the whole project at 45 min.
The ideas below apply to any of the three methods.
- Score before you fold. DIY.org suggests running the blunt side of scissors along a ruler so the paper folds cleanly.
- Practise on scrap paper first, and let the glue dry before you decorate.
- Keep sharp tools supervised when children are helping.
Leftover scraps do not have to go in the bin. They can become backgrounds or small accents on a page, and the scrapbook layout ideas article has some starting points.
Frequently asked questions
Do I need special tools to make a pop up card?
Show answer
Not really. The DIY.org materials list for its pop-up box includes a bone folder or blunt scoring tool and double-sided tape next to the usual cardstock, ruler and scissors, but a basic card needs far less.
Why won’t my card close flat?
Show answer
Look at two details from the KiwiCo tutorial: firm creases in the folded strip, and glued ends that sit centred on the card’s spine. If either is off, the box can bunch up and push against the cover.
Can children make a pop up card?
Show answer
Yes, with help matched to their age. For its pop-up box, DIY.org suggests ages 5-7 try a simplified version with close adult help for cutting and scoring, while ages 8-12 can work more independently.
What if I only have printer paper?
Show answer
You can stack it. DIY.org suggests gluing two sheets of printer paper together in place of cardstock, and scoring with the back of a butter knife or a plastic spoon. Expect a less crisp result than with proper cardstock.



