Hand Sewing Stitches: Running, Back, Slip and Whip Stitch

hand sewing stitches

Not sure which of the many hand sewing stitches to reach for? Start with the running stitch for basic seams, backstitch for strength, slip stitch for hidden closures and whip stitch for edges.

This guide is part of our series on sewing for beginners, so it assumes you are just picking up a needle.

Item Value
Thread for a general project about 2.5 times the length you plan to sew
Thread for sewing on a button about 24 inches
Finished length of doubled thread about 18 inches
Running stitch length about ½ inch
Thread pulled through the needle eye about 3 inches

These figures come from Bob Vila’s hand-sewing guide and Colorado Pressbooks’ costume technology chapter. They can change, so check the sources before you rely on them.

Set up your needle, thread and knot

Match the needle to the cloth. Bob Vila says finer fabrics call for a finer needle because a large one might leave unsightly holes, while thick fabrics need a sturdier needle that will not bend or break.

If you are unsure how a cloth will behave under the needle, the guide to types of fabric for sewing is a useful companion read.

Thread length is the next thing to get right, and the sources give a few rules of thumb:

  • For general projects, Bob Vila suggests roughly 2.5 times the length you plan to sew.
  • For a button, the same guide cuts about 24 inches of thread.
  • Wawak prefers double the seam length, since having extra beats coming up short.
  • For doubled thread, Colorado Pressbooks aims for a finished length of about 18 inches.
  • After threading, leave about 3 inches pulled through the eye for slack, Bob Vila notes.

Longer is not better. Colorado Pressbooks explains that thread twists, frays and tangles as it passes repeatedly through the fabric.

Finish with a knot that holds. The same chapter favors the quilter’s knot because it is quick to tie, compact and secure, and it advises against a square knot. A slipping final knot can unravel the entire line of stitching, so it is worth the extra seconds.

Running stitch: the simple dashed line

The running stitch is a straight stitch that makes a line of dashes, and Bob Vila calls it the basic stitch for simple seams. Short stitches join two pieces of fabric, while longer ones work as temporary basting.

  1. Start at the back of the fabric and push the needle through to the front.
  2. Move the needle about ½ inch forward along your line, as Bob Vila suggests, and insert it back through to the underside.
  3. Repeat along the line, keeping the stitches as evenly spaced as you can for a neater look.
  4. End on the back side of the fabric and knot the thread snugly.

Beyond plain seams, running stitches assemble patchwork pieces and hold quilt layers in place, according to Wawak. They also gather fabric, and Melly Sews notes that smaller stitches make finer gathers.

Sources disagree on tension. Bob Vila advises pulling each stitch taut, while Colorado Pressbooks warns that pulling too hard puckers the fabric, so test on a scrap first.

A metal sewing needle rests diagonally across a spool of red thread.

Backstitch: the strong one

The backstitch starts like a running stitch but doubles back on itself, so you get a continuous line instead of dashes, as Bob Vila describes. Melly Sews says it is the stitch to use when hand sewing a seam, because it is much more secure.

  1. Bring the needle up from the underside of the fabric.
  2. Take a single stitch forward, pull it taut, and bring the needle up again one stitch length ahead.
  3. Bring the needle back toward the previous stitch and insert it into that stitch’s end.
  4. Repeat to the end of the line, then knot off at the back.

A Westport Library guide recommends it for mending seams or any seam that will face a lot of strain and pull. Outside garments, Wawak points out that it also follows smooth and complicated outlines well in embroidery.

Slip stitch: closing seams so they disappear

The slip stitch, also known as a ladder stitch, joins two folded edges so the thread hides between them. Westport Library lists these jobs for it:

  • Bindings
  • Closing a lining
  • Applying an applique invisibly
  • Closing stuffed sewing projects

Wawak adds pillows and stuffed animals to that list, with hems whose seam should stay unseen.

  1. Iron the folds so the edges sit flat.
  2. Slide the threaded needle under the fold to hide the knot.
  3. Take a small stitch inside the fold on one side, then a matching one directly across on the other.
  4. Keep every stitch from going through to the outside of the item.

When you pull the thread, the two seam allowances draw together and the stitching vanishes between them, Melly Sews explains. Hide the starting knot inside a seam allowance for a clean result.

Whip stitch and blanket stitch for edges

The whip stitch is a quick utility stitch for overcasting edges and attaching pieces to linings, says Melly Sews. A Westport Library guide ranks it among the easiest hand stitches, made of short diagonal stitches often used in hemming.

It is not a pretty stitch, so keep it where it will not show on the outside of a garment. Pulling each stitch tight gives a neat, finished appearance, according to Wawak.

The blanket stitch is a variation that carries the thread along the edge of the fabric, per Melly Sews. It is commonly decorative on garments, and keeping the stitches perpendicular to the edge gives the neatest finish.

Which stitch should you use?

Pick by the job in front of you:

  • Holding layers for a while: long running stitches as basting.
  • Gathering: small running stitches.
  • A seam or repair under strain: backstitch.
  • An opening that should look closed: slip stitch.
  • A raw edge or a hidden attachment: whip stitch.
  • A decorative edge: blanket stitch.

Once your knots hold and your stitches stay even, a natural next project is to learn how to sew a button.

Frequently asked questions

What is the strongest hand stitch?

Show answer

Backstitch. Melly Sews explains that each stitch loops onto itself, leaving a solid line on both the front and the back.

Is a slip stitch the same as a ladder stitch?

Show answer

Yes, Bob Vila gives ladder stitch as another name for the slip stitch, which it says often joins seams.

Why does my thread keep tangling?

Show answer

Your thread may simply be too long. Colorado Pressbooks finds that about 18 inches of finished, doubled thread gives cleaner stitches and is often quicker than untangling a longer strand.

Is hand sewing worth it if you own a machine?

Show answer

Often, yes. Hand sewing takes longer than a machine, Bob Vila acknowledges, but costume technicians turn to it when they need precision, flexibility, invisibility or access, Colorado Pressbooks says.